We design, fabricate and install suspended steel platforms that give bridge inspectors safe access to the underside of the bridge. We handle the whole job ourselves: from surveying the existing bridge and preparing the design to installation and the operating manual.
Why bridges need inspection platforms
Girders, piers and bearings have to be inspected regularly, but from below they can usually only be reached with a lift, scaffolding or from the water. A permanent suspended platform means an inspection can be carried out at any time, without special equipment and without restricting traffic on the bridge.
What we make
- Suspended platforms and walkways with handrails beneath the girders
- Ladders for access from deck level
- Lockable hatches, doors and covers
- Safety nets
- Lifting equipment for lowering and raising loads of up to 250 kg
Technical details
- Steel: S235 / S355, all structures hot-dip galvanised or painted
- Loads: platforms are designed for a distributed load of 2.0 kN/m² and a point load of 1.5 kN
- Dimensions: walkway width from 0.8 m, handrail height from 1.1 m
- Connections: bolted, so the structure is installed without any welding on the bridge
Fixing to the existing bridge
We choose the fixing method to suit the bridge structure and its condition:
- Steel girders: the brackets are bolted to the girder web.
- Reinforced concrete structures: the platforms are fixed with concrete screws.
- Listed and historic bridges: we use clamp brackets that wrap around the existing girder, so the bridge structure is neither drilled nor welded.
Completed projects
In 2026 we designed, fabricated and installed suspended inspection platforms and ladders on three bridges over the Neris: one with steel girders, one reinforced concrete bridge and one historic riveted steel bridge.
Get in touch – we will come and survey the bridge and send you a quote.